Fitting The Port Cover; Fitting The Ceramic Fuel Effect - Valor 762 Installer And Owner Manual

Figure 23. Ceramic side walls
(Shown with plain side)

14.4 Fitting the port cover.

The port cover supplied with the fire needs to be fitted to the inner top of the
convection box. Locate the port cover, being careful not to scratch the ceramic side
walls, and secure with three No. 8 x 3/8" screws supplied (See figure 25).
Figure 25. Port cover

14.5 Fitting the ceramic fuel effect.

The installer and owner guide for the ceramic fuel effect is supplied with the ceramic
fuel effect. It is important that the fitting guide for the ceramic fuel effect be placed
inside or attached to this guide and handed to the customer following completion of
the 'Final review' section.
©
GDC Group Ltd. 2013
INSTALLER GUIDE
Page 30
Figure 24. Ceramic support