Debug Spanning-Tree Uplinkfast - Cisco Catalyst 2960 Command Reference Manual

debug spanning-tree uplinkfast

debug spanning-tree uplinkfast
Use the debug spanning-tree uplinkfast privileged EXEC command to enable debugging of
spanning-tree UplinkFast events. Use the no form of this command to disable debugging.
Syntax Description
exceptions
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug spanning-tree uplinkfast command is the same as the no debug spanning-tree
uplinkfast command.
Related Commands Command
show debugging
show spanning-tree
Catalyst 2960 Switch Command Reference
B-66
debug spanning-tree uplinkfast [exceptions]
no debug spanning-tree uplinkfast [exceptions]
(Optional) Display spanning-tree UplinkFast-exception debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays spanning-tree state information.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-04