Debug Vqpc - Cisco Catalyst 2960 Command Reference Manual

debug vqpc

debug vqpc
Use the debug vqpc privileged EXEC command to enable debugging of the VLAN Query Protocol
(VQP) client. Use the no form of this command to disable debugging.
Syntax Description
all
cli
events
learn
packet
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug vqpc command is the same as the no debug vqpc command.
Related Commands Command
show debugging
Catalyst 2960 Switch Command Reference
B-76
debug vqpc [all | cli | events | learn | packet]
no debug vqpc [all | cli | events | learn | packet]
(Optional) Display all VQP client debug messages.
(Optional) Display the VQP client command-line interface (CLI) debug
messages.
(Optional) Display VQP client event debug messages.
(Optional) Display VQP client address learning debug messages.
(Optional) Display VQP client packet information debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-04