Cisco Catalyst 2960 Command Reference Manual page 644

delete
delete
Use the delete bootloader command to delete one or more files from the specified file system.
Syntax Description filesystem:
/file-url
Command Modes Bootloader
Command History Release
12.2(25)FX
Usage Guidelines Filenames and directory names are case sensitive.
The switch prompts you for confirmation before deleting each file.
Examples
This example shows how to delete two files:
switch: delete flash:test2.text flash:test5.text
Are you sure you want to delete "flash:test2.text" (y/n)?y
File "flash:test2.text" deleted
Are you sure you want to delete "flash:test5.text" (y/n)?y
File "flash:test2.text" deleted
You can verify that the files were deleted by entering the dir flash: bootloader command.
Related Commands Command
copy
Catalyst 2960 Switch Command Reference
A-6
delete filesystem:/file-url ...
Alias for a flash file system. Use flash: for the system board flash device.
Path (directory) and filename to delete. Separate each filename with a space.
Modification
This command was introduced.
Appendix A
Description
Copies a file from a source to a destination.
Catalyst 2960 Switch Bootloader Commands
OL-8604-04