Link State Group - Cisco Catalyst 2960 Command Reference Manual

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Examples
This example shows how to configure the interfaces as upstream in group 2:
Switch# configure terminal
Switch(config)# interface range gigabitethernet0/11 - 14
Switch(config-if-range)# link state group 2 downstream
Switch(config-if-range)# end
Switch(config-if)# end
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
link state track
show link state group
show running-config
OL-8604-04
Description
Enables a link-state group.
Displays the link-state group information.
Displays the current operating configuration. For syntax information, select
Cisco IOS Configuration Fundamentals Command Reference for
Release 12.2 > Cisco IOS File Management Commands > Configuration
File Commands.
Catalyst 2960 Switch Command Reference

link state group

2-173