Cisco Catalyst 2960 Command Reference Manual page 192

lacp port-priority
Examples
This example shows how to configure the LACP port priority on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# lacp port-priority 1000
You can verify your settings by entering the show lacp [channel-group-number] internal privileged
EXEC command.
Related Commands Command
channel-group
lacp system-priority
show lacp
internal
Catalyst 2960 Switch Command Reference
2-166
[channel-group-number]
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Description
Assigns an Ethernet port to an EtherChannel group.
Configures the LACP system priority.
Displays internal information for all channel groups or for
the specified channel group.
OL-8604-04