Appendix; Catalyst 2960 Switch Debug Commands - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

A P P E N D I X

This appendix describes the debug privileged EXEC commands that have been created or changed for

use with the Catalyst 2960 switch. These commands are helpful in diagnosing and resolving

internetworking problems and should be enabled only under the guidance of Cisco technical support

Because debugging output is assigned high priority in the CPU process, it can render the system

unusable. For this reason, use the debug commands only to troubleshoot specific problems or during

troubleshooting sessions with Cisco technical support staff. It is best to use the debug commands during

periods of lower network traffic and fewer users. Debugging during these periods decreases the

likelihood that increased debug command processing overhead will affect system use.

Catalyst 2960 Switch Command Reference