Cisco Catalyst 2960 Command Reference Manual page 245

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

Switch(config-if)# queue-set 2

You can verify your settings by entering the show mls qos interface [interface-id] buffers or the show

mls qos queue-set privileged EXEC command.

Related Commands

mls qos queue-set output threshold

show mls qos interface

show mls qos queue-set

Configures the weighted tail-drop (WTD) thresholds,

guarantees the availability of buffers, and configures the

maximum memory allocation to a queue-set.

Maps a port to a queue-set.

Displays quality of service (QoS) information.

Displays egress queue settings for the queue-set.

mls qos queue-set output buffers

Catalyst 2960 Switch Command Reference