Cisco Catalyst 2960 Command Reference Manual page 392
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
This is an example of output from the show ip dhcp snooping database detail command:
Switch# show ip dhcp snooping database detail
Agent URL : tftp://10.1.1.1/directory/file
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : 7 (00:00:07)
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : 17:14:25 UTC Sat Jul 7 2001
Last Failed Reason : Unable to access URL.
Total Attempts
Successful Transfers :
Successful Reads
Successful Writes
Media Failures
First successful access: Read
Last ignored bindings counters :
Binding Collisions
Invalid interfaces
Parse failures
Last Ignored Time : None
Total ignored bindings counters:
Binding Collisions
Invalid interfaces
Parse failures
Related Commands
Command
ip dhcp snooping
ip dhcp snooping database
show ip dhcp snooping
OL-8604-04
:
21
Startup Failures :
0
Failed Transfers :
:
0
Failed Reads
:
0
Failed Writes
:
0
:
0
Expired leases
:
0
Unsupported vlans :
:
0
:
0
Expired leases
:
0
Unsupported vlans :
:
0
Description
Enables DHCP snooping on a VLAN.
Configures the DHCP snooping binding database agent or the
binding file.
Displays DHCP snooping information.
show ip dhcp snooping database
0
21
:
0
:
21
:
0
0
:
0
0
Catalyst 2960 Switch Command Reference
2-365
Advertisement
Table of Contents
