Debug Mac-Notification - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug mac-notification

Use the debug mac-notification privileged EXEC command to enable debugging of MAC notification
events. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug mac-notification command is the same as the no debug mac-notification command.
Related Commands Command
show debugging
show mac
address-table
notification
OL-8604-04
debug mac-notification
no debug mac-notification
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the MAC address notification information for all interfaces or the
specified interface.
debug mac-notification
Catalyst 2960 Switch Command Reference
B-17