Smooth Fitness VT-3.4 Owner's Manual page 4

"H
I
ARDWARE DENTIFICATION
Unpack the box in a clear area. Follow the List of Hardware Kit below. This chart is provided to help identify the hardware
used in the assembly process. Place the washers, the end of bolts, or screws on the circles to check for the correct
diameter. Use the small scale to check the length of the bolts and screws. Do not dispose of the packing material until your
trial period has expired
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw. Flat head
bolts and screws are measured from the top of the head to the end of the
bolt or screw
After unpacking the unit, you will notice that the package includes 3 bags of hardware (HARDWARE KIT A,
HARDWARE KIT B and HARDWARE KIT C).
Assembly's Step 1, 2, 3, 7, 8: Using HARDWARE KIT A
Assembly's Step 9, 10, 11: Using
Note:
a. Please review below to know the content of each hardware kit (A and B)
b. Some small parts may have been pre-attached for shipping. If a part is not in the hardware bag, check to see if it has
been pre-assembled
A
HARDWARE KIT
C
HART"
HARDWARE KIT B
Part No. and Description
79 Lock Washer (M8)
80 Washer (8x16x2.0t)
93 Bolt (M6xp1.0x25mm)
94 Bolt (M8xp1.25x16mm)
101 Bolt (M8xp1.25x90mm)
106 Bolt (M8xp1.25x90mm)
4
Q'TY
6 pcs
2 pcs
2 pcs
4 pcs
2 pcs
2 pcs