Smooth Fitness VT-3.4 Owner's Manual page 8

"A
I
SSEMBLY NSTRUCTIONS"
S –
TEP 6 Linkage & Linkage Plug Assembly
NOTE: For shipping purpose, the 1pcs Bolt (M8xp1.25x50mm)(104), 1pcs Nylon Nut
(M8xp1.25)(112) and 1pcs Bolt (M5xp0.8x25mm)(92) are attached to the Pedal Arm
Connector (16) as pictured on the.
a. Remove the1pcs Bolt (M8xp1.25x50mm)(104), 1pcs Nylon Nut (M8xp1.25)(112) and 1pcs Bolt (M5xp0.8x25mm)(92)
from the P edal Arm Connector (16).
b. Follow the FIG 1 above, to attach the Right Linkage (15) to the Right Pedal Arm Connector
(16) and secure it with the 1pcs Bolt (M8xp1.25x50mm)(104), 1pcs Nylon Nut (M8xp1.25)(112).
NOTE: In order to allow the Linkage (15) to rotate smoothly; after fully tightening the Bolts
(104) and Nuts (112), loosen the Nuts (112) only 1/8 counterclockwise turn.
c. Attach the Right Linkage Plug (58) to the Right Pedal Arm Connector (16) and secure with the
1pcs Bolt (M5xp0.8x25mm)(92).
d. Repeat the process above for the left side.
e. Go back to Step 4 and fully tighten the 5pcs Nylon Nuts (M8xp1.25)(112)
f. Slide the Upright Sleeve (37) down to cover the open area of the Main Frame (1).
FIG. 1
on the bottom of the Upright Post (6).
S –
TEP 4
Post Assembly
a. Slide the Upright Sleeve (37) onto the Upright
Post (6).
NOTE: For shipping purposes
the 5pcs Nylon Nuts
(M8xp1.25)(112) are
preinstalled in the Main Frame
(1) as pictured on the right.
b. Remove the 5pcs Nylon
Nuts (M8xp1.25)(112) from the Main Frame
(1).
c. Refer to the series of pictures on the left
noting point A (Middle Handlebar) and point B
(Pedal Arm Connector) before attaching the
Upright Post (6) to the Main Frame (1), be
sure to raise point A (Middle Handlebar) to 45
degrees, when attaching the Upright Post (6)
to the Main Frame (1). Now secure the Upright
Post (6) to the Main Frame (1), by suing the
5pcs Nylon Nuts (M8xp1.25)(112). **Do not
fully tighten nuts (112) until Step 6.**
S –
TEP 5
Connect the Middle Data Cable (118) to the Lower
Data Cable (119). NOTE: Be careful not to pinch
the wires.
8
Upright Sleeve & Upright
Data Cable Assembly