Macintosh; For Usb Interface Users (For Mac Os ® X 10.2.4 Or Greater) - Brother MFC-3360C Quick Setup Manual

Installing the Driver & Software
For USB Interface Users
2
(For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4 through 11.
Note
®
For Mac OS X 10.2.0 to 10.2.3 users, upgrade to
®
Mac OS X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Connect the USB cable to the USB socket
marked with a
USB socket next to the handset cord socket as
shown below.
2
Connect the USB cable to your computer.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
Note
Make sure that the machine is turned on by
connecting the power cord.
3
Turn on your Macintosh
4
Put the supplied CD-ROM into your CD-ROM
drive.
®
X 10.2.4 or greater)
®
X, visit
symbol. You will find the
®
.
5
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing to software.
6
The Brother software will search for the Brother
device. During this time the following screen
will appear.
7
When this screen appears, click OK.
®
For Mac OS X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 12.
8
®
For Mac OS X 10.2.4 to 10.2.8 users:
Click Add.
®

Macintosh

17