Eeprom Customizing (Function Code 74) - Brother DCPJ525W Service Manual

Hide thumbs Also See for DCPJ525W:
Table of Contents

Advertisement

1.4.26 EEPROM Customizing (Function code 74)

Function
This procedure customizes the EEPROM according to language, function settings, and
firmware switch settings.
Notes:
• If you replace the main PCB, be sure to carry out this procedure.
• Once this procedure is carried out, it is necessary to write the corresponding
language data, so be sure to write local programs (refer to
Operating Procedure
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The "SELECT 74?" appears on the LCD.
(2) Press the Black Start (Mono Start) key, and the current customizing code appears.
(3) Enter the desired customizing code. (See the following pages.)
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(4) Press the Black Start (Mono Start) key.
The "Please DL ROM" appears on the LCD.
(5) With the "Please DL ROM" displayed, connect the machine to your PC.
(6) On the PC, run "filedg32.exe" to display the Filedrgs window. Drag and drop the target
firmware onto the Brother Maintenance USB Printer driver icon in that window.
If you press the Stop/Exit key or no keys are pressed for one minute in the above procedure, the
machine stops the procedure and returns to the initial stage of the maintenance mode.
5-52
Chapter 4, Section
2.1.2).
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents