Utility mode/Copy mode parameters
Specifying settings for the paper loaded into the 1st paper drawer
("TRAY1 PAPER" parameter)
1
Display the "PAPER SOURCE SETUP" menu.
–
Refer to "Displaying the "PAPER SOURCE SETUP" menu" on
page 7-20.
2
Press the [+] or [,] key until "TRAY1 PAPER" is selected, and then
press the [OK] key.
–
To specify the paper size, continue with step 3.
–
To select the paper type, continue with step 5.
ineo 163/213
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
PAPER SOURCE SETUP
INCH/METRIC
TRAY1 PAPER
PAPER TYPE
7
7-23