Develop ineo 163 User Manual page 219

Utility mode/Copy mode parameters
4
Press the [+] or [,] key until the desired length of time until key
repeating begins is selected, and then press the [OK] key.
The "KEY SPEED SETTING" menu appears again. Press the [Back] key
to return to the "MACHINE SETTING" menu. To specify the setting for
"INTERVAL", continue with step 5.
5
Press the [+] or [,] key until "INTERVAL" is selected, and then press
the [OK] key.
6
Press the [+] or [,] key until the desired time interval is selected, and
then press the [OK] key.
The "KEY SPEED SETTING" menu appears again. Press the [Back] key
to return to the "MACHINE SETTING" menu.
ineo 163/213
TIME TO START
0.1sec
0.3sec
0.5sec
KEY SPEED SETTING
TIME TO START
INTERVAL
RETURN
INTERVAL
0.1sec
0.3sec
0.5sec
7
7-17