Utility mode/Copy mode parameters
Selecting the paper size unit measurement system ("INCH/METRIC"
parameter)
1
Display the "PAPER SOURCE SETUP" menu.
–
Refer to "Displaying the "PAPER SOURCE SETUP" menu" on
page 7-20.
2
Press the [+] or [,] key until "INCH/METRIC" is selected, and then
press the [OK] key.
3
Press the [+] or [,] key until the desired paper drawer is selected, and
then press the [OK] key.
ineo 163/213
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
PAPER SOURCE SETUP
INCH/METRIC
TRAY1 PAPER
PAPER TYPE
INCH/METRIC
TRAY1
TRAY2
TRAY3
7
7-21