Develop ineo 163 User Manual page 63

P re c a u tio n
No. Part name
22 [Fax] key
23 [Scan] key/indicator
24 [Copy] key/indicator
25 [123/ABC] key
26 [Reset] key
27 [Interrupt] key/indi-
cator
28 [Clear/Stop] key
ineo 163/213
22 23 24 25
30
Description
Press to enter Fax mode. The indicator on the key lights up in
green to indicate that the machine is in Fax mode. (Available only
when fax kit FK-506 is installed)
Press to enter Scan mode. The indicator lights up in green to in-
dicate that the machine is in Scan mode. (Available only when net-
work interface card NC-503 or image controller IC-206 are
installed)
Press to enter Copy mode. The indicator lights up in green to in-
dicate that the machine is in Copy mode.
Press to switch between number input mode and letter input
mode. (Available only when fax kit FK-506, network interface card
NC-503, or image controller IC-206 is installed.)
• Press to clear all settings (except programmed settings) en-
tered from the control panel.
• Press to delete the job being specified.
Press to enter Interrupt mode. The indicator lights up in green to
indicate that the machine is in Interrupt mode.
Press the key again to cancel Interrupt mode and return to the
mode before Interrupt mode was entered. (See p. 5-65.)
If this key is pressed while a computer document is being printed,
printing stops so that the interrupting copy job can be performed.
Press this key again to continue printing the computer document.
• Press to clear the entered number and letters.
• Press to stop a continuous copy operation.
• Press to stop the print job from the computer.
26
29
3
27
28
3-15