Selecting The Default Density ("Density Priority" Parameter); Density Priority - Develop ineo 163 User Manual

Utility mode/Copy mode parameters

Selecting the default density ("DENSITY PRIORITY" parameter)

1
Display the "COPY SETTING 1" menu.
– Refer to "Displaying the "COPY SETTING 1" menu" on page 7-55.
2
Press the [+] or [,] key until "DENSITY PRIORITY" is selected, and
then press the [OK] key.
3
Press the [+] or [,] key until "AUTO" or "MANUAL" is selected, and
then press the [OK] key.
The "COPY SETTING 1" menu appears again.
ineo 163/213
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
COPY SETTING 1
PAPER PRIORITY
QUALITY PRIORITY

DENSITY PRIORITY

DENSITY PRIORITY
AUTO
MANUAL
7
7-59