7
Changing settings for the auto panel reset operation ("AUTO PANEL
RESET" parameter)
1
Display the "MACHINE SETTING" menu.
–
Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2
Press the [+] or [,] key until "AUTO PANEL RESET" is selected, and
then press the [OK] key.
3
Press the [+] or [,] key until "OFF", "30sec", "1min", "2min", "3min",
"4min" or "5min" is selected, and then press the [OK] key.
The "MACHINE SETTING" menu appears again.
7-8
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
MACHINE SETTING
AUTO PANEL RESET
ENERGY SAVE MODE
AUTO SHUT OFF
AUTO PANEL RESET
OFF
30sec
1min
Utility mode/Copy mode parameters
ineo 163/213
Need help?
Do you have a question about the ineo 163 and is the answer not in the manual?