Table of Contents
Advertisement
6—Loading paper and specialty media
The selection and handling of paper and specialty media can affect how reliably documents print. For
more information, see
Avoiding jams
Setting the paper size and type
From the home screen navigate to:
>Paper Menu >Paper Size/Type > select a tray > select the paper size or type >
Configuring Universal paper settings
The Universal paper size is a user-defined setting that lets you print on paper sizes that are not preset in
the printer menus.
Notes:
•
The smallest supported Universal size is 76.2 x 127 mm (3 x 5 inches).
•
The largest supported Universal size is 215.9 x 355.6 mm (8.5 x 14 inches).
1. From the home screen, navigate to:
>Paper Menu >Universal Setup >Units of Measure > select the unit of measure >
2. Touch Portrait Width or Portrait Height.
3. Select the width or height, and then touch
Loading trays
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray
separately. Keep all trays closed until needed.
1. Pull out the tray completely.
Note: Do not remove trays while a job prints or while Busy appears on the printer display. Doing so
may cause a jam.
User's Guide
and
Storing
paper.
.
- 61 -
Advertisement
Table of Contents
