Changing The Administrator Access Code ("Administrator No." Parameter); Copy Setting 1; Account Track - Develop ineo 163 User Manual

Utility mode/Copy mode parameters
Changing the administrator access code ("ADMINISTRATOR NO."
parameter)
1
Display the "ADMIN. MANAGEMENT" menu.
– Refer to "Displaying the "ADMIN. MANAGEMENT" menu" on
page 7-37.
2
Press the [+] or [,] key until "ADMINISTRATOR NO." is selected, and
then press the [OK] key.
3
Use the keypad to type in the current administrator access code, and
then press the [OK] key.
ineo 163/213
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT

COPY SETTING 1

ADMIN. MANAGEMENT
ADMINISTRATOR NO.
AUTO SHUT OFF

ACCOUNT TRACK

ADMINISTRATOR NUMBER
CURRENT NO.:-----
7
7-39