Default Settings; Automatically Clearing Settings (Auto Panel Reset) - Develop ineo 163 User Manual

3

Default settings

The settings that are automatically selected when the machine is turned on
or an auto panel reset operation is performed are called the "default
settings". These settings serve as a reference for all functions.
Copy mode
- Number of copies: 1
- Copy density: AUTO
- Zoom: 100% (full size)
- Paper: AUTO
- Finishing: NON-SORT
!
Detail
The default settings can be changed from Utility mode. (Refer to
page 7-3.)

Automatically clearing settings (Auto panel reset)

With the auto panel reset operation, all functions and modes are reset to their
default settings after copying or after a specified length of time has passed
after the last operation is finished. (Default setting: 1 minute)
!
Detail
The length of time until the auto panel reset operation is performed can
be set to 30 seconds or a setting between 1 and 5 minutes.
In addition, the auto panel reset operation can be disabled.
For details, refer to page 7-8.
3-20
Precaution
ineo 163/213