Develop ineo 163 User Manual page 66

3
No. Display indication
3 Paper type
4 Number of copies
5 Zoom ratio
AUTO
100%
[X/Y]
6 Copy density
7 Message display
8 Document image
quality
TEXT/PHOTO
PHOTO
TEXT
9 Menu or function
3-18
Description
Indicates the paper type that is selected.
Indicates that plain paper is selected.
Indicates that recycled paper is selected.
Indicates that special paper is selected.
Indicates that the selected paper is only for single-sided printing.
Indicates that thick paper is selected.
Indicates that overhead projector transparencies are selected.
Indicates that envelopes or postcards are selected.
Indicates the specified number of copies.
A setting between 1 and 99 can be specified.
Displays the specified copy zoom ratio.
Indicates that the "AUTO" Zoom setting is selected.
The most appropriate zoom ratio is automatically selected based
on the size of the loaded document and the specified paper size.
Indicates that the full size ("100%") zoom ratio is selected.
Copies are produced at the same size as the document.
Indicates that a setting is selected for the "X/Y ZOOM" function.
Copies are produced with different zoom ratios in the vertical and
horizontal directions.
Indicates the density level for the selected Density setting.
The setting is shown at one of three levels in the Copy mode screen.
The status of the machine and the status of computer printing op-
erations while the machine is in Copy mode are displayed.
Indicates the selected Quality setting.
Indicates that the "TEXT/PHOTO" Quality setting is selected.
Select this setting when copying printed documents containing
both text and images, such as newspapers or magazines.
This setting can be selected together with the "AUTO" Density set-
ting.
Indicates that the "PHOTO" Quality setting is selected.
Select this setting when copying printed documents, such as pam-
phlets or catalogs. With this setting, reproductions of halftone doc-
ument images (photographs, etc.) that cannot be reproduced with
the "TEXT" setting are better produced.
Indicates that the "TEXT" Quality setting is selected.
Select this setting when copying documents containing only text.
With this setting, the copied text is reproduced with sharp edges,
making it easier to read.
This setting can be selected together with the "AUTO" Density set-
ting.
Displays the current menu, function or setting.
Precaution
ineo 163/213