Making Copies After Specifying A Copy Density - Develop ineo 163 User Manual

Making copies

Making copies after specifying a copy density

Note
If "PHOTO" is selected as the image quality, "AUTO" cannot be selected.
1
Position the document to be copied.
– Refer to "Loading the document" on page 4-18.
2
Press the [Density] key.
The DENSITY menu appears.
3
Press the [+] or [,] key until "AUTO" or "MANUAL" is selected.
– If "AUTO" was selected, press the [OK] key.
ineo 163/213
DENSITY(TEXT)
AUTO
MANUAL
5
5-63