Automatically Conserving Energy (Power Save Mode); Automatically Turning Off The Machine (Auto Shut-Off); Queued Copy Jobs - Develop ineo 163 User Manual

Precaution

Automatically conserving energy (Power Save mode)

With the Power Save mode, the machine automatically enters a power-
saving mode instead of turning off.
When the machine is in Power Save mode, the indicator on the [Start] key
remains lit in green, but the display goes off.
Conditions for entering Power Save mode
- When the [Power Save] key is pressed
- After the specified length of time has elapsed after the last operation
(default setting: 15 minutes)
!
Detail
If the auto shut-off operation is performed during Power Save mode, the
machine turns off.
The length of time until the machine enters Power Save mode can be set
between 1 and 240 minutes. (For details, refer to page 7-9.)

Automatically turning off the machine (Auto shut-off)

With the auto shut-off operation, the copier automatically turns off if no
operation is performed for a specified length of time, in order to conserve
energy. (Default setting: OFF)
!
Detail
Specify the desired length of time (between 15 and 240 minutes) until the
machine automatically turns off. (Refer to page 7-10.)

Queued copy jobs

Copy jobs can be queued by loading the document and pressing the [Start]
key while ">>Warming Up" appears in the fourth line of the display.
When the message ">>Warming Up" disappears, scanning of the loaded
document begins, and copies are produced.
ineo 163/213
3
3-21