Adjusting The Margin Width ("Margin Setting" Parameter) - Develop ineo 163 User Manual

Utility mode/Copy mode parameters

Adjusting the margin width ("MARGIN SETTING" parameter)

1
Display the "COPY SETTING 1" menu.
– Refer to "Displaying the "COPY SETTING 1" menu" on page 7-55.
2
Press the [+] or [,] key until "MARGIN SETTING" is selected, and then
press the [OK] key.
ineo 163/213
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
COPY SETTING 1
DENSITY LEVEL
BINDING POSITION
MARGIN SETTING
7
7-65