7
Changing the image quality level when the document feeder is used
("DENSITY (ADF)" parameter)
1
Display the "MACHINE SETTING" menu.
–
Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2
Press the [+] or [,] key until "DENSITY (ADF)" is selected, and then
press the [OK] key.
3
Press the [+] or [,] key until "MODE1" or "MODE2" is selected, and
then press the [OK] key.
The "MACHINE SETTING" menu appears again.
7-12
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
MACHINE SETTING
DENSITY(ADF)
DENSITY(BOOK)
PRINT DENSITY
DENSITY(ADF)
MODE1
MODE2
Utility mode/Copy mode parameters
ineo 163/213