Download  Print this page

Interface Description; 24 V Dc Power Supply - Siemens SIMATIC Industrial Flat Panel IFP1500 Operating Instructions Manual

Hide thumbs

Advertisement

Protection against foreign objects and water
Degree of protection in accordance
with IEC 60529
Front
Rear panel
The degree of protection of the front panel can only be guaranteed if the mounting seal is
properly installed at the mounting cut-out and the cover flap of the USB interface is closed on
the Touch/Key device.
Degree of pollution / overvoltage category according to IEC 61131
● Degree of pollution 2
● Overvoltage category II
7.6

Interface description

7.6.1

24 V DC Power Supply

24 V DC power supply
Pin no.
1
2
1
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 06/2014, A5E31298376-AB
Meaning
+24 V DC
GND
24 V
1
GND is internally connected to signal ground on DVI, for example, device ground and housing.
Explanation
When mounted:
IP65
Front face only Type 4X/Type 12 (indoor use only)
IP20
Touch protection test with standard test probes.
There is no protection against ingress by water.
Technical information
7.6 Interface description
91

Advertisement

   Also See for Siemens SIMATIC Industrial Flat Panel IFP1500

   Related Manuals for Siemens SIMATIC Industrial Flat Panel IFP1500

   Related Content for Siemens SIMATIC Industrial Flat Panel IFP1500

Comments to this Manuals

Symbols: 0
Latest comments: