Commissioning the device
4.2 SIMATIC IPC Wizard
SIMATIC IPC Wizard
With SIMATIC IPC Wizard for SIMATIC Industrial PCs, you install device-specific software
and drivers for operating your devices.
The SIMATIC IPC Wizard recognizes the existing hardware components and automatically
installs the associated software and drivers.
SIMATIC industrial PCs with pre-installed software are already equipped with the SIMATIC
IPC Wizard, which runs automatically on initial start-up.
On SIMATIC Industrial PCs without pre-installed software, the SIMATIC IPC Wizard can be
installed from the "Documentation and Drivers" CD/DVD.
The SIMATIC IPC Wizard consists of the following software components:
● Panel PC Tools
Note the compatibility of the software components with the different operating systems in the
For the SIMATIC IPC Wizard you require the following hardware:
● PC, e.g., SIMATIC IPC
● 100 MB of free hard disk space on the C:\ partition
● SIMATIC Industrial Flat Panel
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 06/2014, A5E31298376-AB