3. Follow the instructions.
4. Finish the installation with the "OK" button; for server operating systems use "Now".
You have installed the software of the SIMATIC IPC Wizard.
If the IPC Wizard is already installed, setup can be restarted with "Start > Siemens
Automation> Simatic > IPC_Wizard".
The following options are available:
• Modify: Add or deselect features
• Repair: Repair all installed features
• Remove: Remove IPC Wizard including all components
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 06/2014, A5E31298376-AB
The SIMATIC IPC Wizard recognizes the existing hardware components and
automatically installs the associated software and drivers. This operation can take several
When all software and driver components are installed, the following dialog is displayed:
In the case of server operating systems the dialog contains the "Now" and "Later" buttons
instead of "OK".
The PC is restarted.
Commissioning the device
4.2 SIMATIC IPC Wizard