Output Formats - Cardinal PD150 Owner's Manual

Prodoc bfa series digital physician scale with body fat analysis
Table of Contents

Advertisement

The following formats apply to both the Serial port and the USB port. Note that the Serial port is
to be used with a ticket printer and that the USB port can only communicate with a computer.
FORMAT "1" (Ticket Format)
If FORMAT "1" (Ticket Format) was selected for the USB or RS232 PORT FUNCTION,
USB=1 or RS232=1, the data will be printed (RS232) or output (USB) in the format below.
Note that the output of this format includes spaces and descriptions.
Time, mm/dd/yy
BMI
Height
Weight
Age
Gender
Activity
Body Fat
Body Water
Bone Mass
Muscle Mass
FORMAT "2" (Journal Format)
If FORMAT "2" (Journal Format) was selected for the USB or RS232 PORT FUNCTION,
USB=2 or RS232=2, the data will be printed (RS232) or output (USB) in the format below.
Note that the output of this format includes commas between each field and a carriage return
to terminate the record.
Time, Date, BMI, Height, Weight, Age, Gender, Activity, Body Fat, Body Water,
Bone Mass, Muscle Mass <Cr>
REMOTE PRINT COMMAND
The host device (computer) sends:
<LF> P <CR>
This command is equivalent to pressing and holding the UNIT/PRINT key for over 2 seconds.
The scale will respond by outputting to the USB port either Format "1" or Format "2" based on
the parameters selected in the USB PORT FUNCTION section of setup.
44

OUTPUT FORMATS

21.5
175.0cm
68.0kg
30 yrs
Female
Normal
10%
20%
15%
25%
0044-M380-O1 Rev A ProDoc BFA Series

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents