Body Fat And Total Body Water Estimation With Mechanical Height Rod Or No Height Rod - Cardinal PD150 Owner's Manual

Body Fat and Total Body Water Estimation
w
ith Mechanical Height Rod or No Height Rod
1. Press ON/OFF key.
2. The display will turn on, show all digits, the software version for a few seconds and then a
small o is shown and moves across the display until a stable zero is established.
3. Next, after establishing zero, the scale will show 0.0 on display.
NOTE: If the power up zero is too large, the display will show Err0 for a few seconds, then
show off and turn the scale off.
4. Press and hold PRINT/UNITS key to toggle between kilograms and pounds. The kg or lb
annunciator will turn on to show which weighing unit is active.
NOTE: Changing the units between kilograms and pounds will also change the height
measurement between centimeters (cm) and feet/inches ( ' / " ).
5. Patient may now step on scale.
6. Press MODE/ENTER/HEIGHT key.
7. Enter the patient's height by using the numeric keys.
A. If Pounds Only or Pounds/Kilograms was selected for Unit= in setup, display will change
to show 5' 6.1".with the digit for the feet flashing.
a. Use numeric keys to enter 1 digit for height in feet, then press
MODE/ENTER/HEIGHT key.
b. Display will change to flashing the digit for the decimal inches.
c. Use numeric keys to enter up to 2 digits (9.9 max.) for height in inches and then
press MODE/ENTER/HEIGHT key.
d. The display will change to the BFA mode (BFA annunciator will be flashing).
B. If Kilograms Only, Kilograms/Pounds or Stones and Pounds or Kilograms was selected
for Unit= in setup, display will change to show 168.0
a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and then
press MODE/ENTER/HEIGHT key.
b. The display will change to the BFA mode (BFA annunciator will be flashing).
8. Press MODE/ENTER/HEIGHT key.
9. The display will change to show the AGE prompt.
10. Using the numeric keys, enter up to 2 digits for the patient's age and press the
MODE/ENTER/HEIGHT key.
11. The display will change to show the GENDER selection
12. Press the RECALL or
MODE/ENTER/HEIGHT key.
13. The display will change to show the Normal (N) or Athlete (A) Mode selection.
14. Press the RECALL or
MODE/ENTER/HEIGHT key.
15. While the patient is still standing on the scale, the display will show a measurement pattern
while computing.
34
OPERATION
STORE keys to select the gender and press
STORE keys to select the Normal or Athlete Mode and press
0044-M380-O1 Rev A ProDoc BFA Series
.
cm
(male) or (female).