Unpacking
1
Remove
the scale base, column with attached display, hardware pack and other components
from the shipping carton. After removing from the carton, check for any damage that may have
taken place during shipment. Keep and use the original carton and packing material for return
shipment if it should become necessary. The purchaser is responsible for filing all claims for any
damages or loss incurred during transit. Remove all plastic wrapping, foam fillers and cardboard
material from the scale base, display and other components. You should have the following
components:
Scale Base
Column with attached Display
,
Hardware Pack
(4) M5x45 Machine Screws
(1) Philips Screwdriver
Optional Digital or Mechanical Height Rod
1
See Note Below.
NOTE: To remove the scale base, column with attached display and optional
height rod from the carton, grasp both sides of the scale base and lift up with
equal force.
14
PD350
containing:
Figure No. 9
0044-M380-O1 Rev A ProDoc BFA Series
M5x45 Machine Screw