Annunciators - Cardinal PD150 Owner's Manual

Annunciators

The annunciators are turned on to indicate that the scale display is in the mode corresponding to
the annunciator label or that the status indicated by the label is active.
Memory
Location
Body Fat %
Total Body Water %
Normal Mode
1 2 3 4
The 1, 2, 3, or 4 annunciator will flash to show which MEM position is being selected in the
Memory Store and Recall Function.
WEIGHT
This annunciator is turned on when the scale is in the weight only mode.
HEIGHT
This annunciator is turned on when the scale is in the height measurement mode.
BMI (Body Mass Index)
This annunciator is turned on to indicate the scale is in the Body Mass Index mode.
BFA (Body Fat Analysis)
This annunciator is turned on to indicate the scale is in the Body Fat Analysis mode.
ZERO
This annunciator is turned on to indicate that the weight displayed is within +/- 1/4 division of the
center of zero.
NET
This annunciator is turned on to show that the weight displayed is the net weight. Net weight is
determined by subtracting the stored tare weight from the gross weight. The tare weight is for
example the weight of a blanket or other item. Note that the NET annunciator is only active when
a tare weight value is stored.
STA
This annunciator is turned on when the weight on the scale is stable.
LOCK
This annunciator is turned on to show that the scale is locked onto the displayed weight.
' "
These annunciators are turned on when the displayed height measurement is in feet and inches.
OPERATION
BMI BFA
Mode Mode
Male Icon
Female Icon
Athlete Mode
0044-M380-O1 Rev A ProDoc BFA Series
Tare Stable
Function Reading
Bone Mass%
Body Fat and Total Body
Muscle Mass %
Water Indication Bar
25