Memory And Recall Function - Cardinal PD150 Owner's Manual

Memory and Recall Function

The scale features 4 personal memory settings. This allows users to store and recall their own
settings.
To Store Measured Data into Memory
1. With the display showing the results in the BMI or Body Fat and Total Water Estimation
Mode, press and hold the
2. The MEM 1 position annunciator will flash.
3. Continue to press the
position annunciators (1, 2, 3 or 4) will flash to show which position is currently selected. Note
that repeatedly pressing the
to the MEM 1 position.
4. When the desired MEM position has been selected, press the MODE/ENTER/HEIGHT key.
5. The new results for the BMI or Body Fat and Total Water Estimation Mode operation will be
stored in memory and replace the previously stored results.
6. Note that the result will then be displayed around 4 seconds, sequentially 3 times.
7. The scale will then automatically return to the weighing mode
8. Any previously turned on MEM position annunciators will turn off.
36
OPERATION
STORE key.
(Position 1 Selected)
STORE key until the desired MEM position is selected. The MEM
STORE key will advance to the next MEM position and return
(Position 2 Selected)
(Weight Stored in Position 1)
0044-M380-O1 Rev A ProDoc BFA Series