Operation; Keypad Functions - Cardinal PD150 Owner's Manual

Keypad Functions

DO NOT operate the keypad with pointed objects (pencils, pens, etc).
Damage to keypad resulting from this practice is NOT covered under warranty.
With the scale off, pressing this key will apply power to the scale and turn on the
display. If the scale is on, pressing this key will show oFF on the display and turn the
scale off.
This key is a dual purpose key. First, it is used to send the weight and associated
data to the serial printer. During operation, pressing this key will cause a print
operation to occur.
Second it is used to change the weighing units between pounds and kilograms. For
example, with pounds displayed, pressing and holding this key will change the
weighting units to kilograms. NOTE: This feature must be enabled during setup and
calibration of the scale to be operational.
This key is used to lock and unlock the display. If the HOLD feature was enabled
during setup and calibration, pressing this key will cause the display to lock onto the
weight. Pressing the key again will unlock the display and return it to zero.
NOTE: The scale will not respond to pressing the LOCK/RELEASE key unless the
weight is stable and the STA annunciator is turned on.

OPERATION

Figure No. 25
0044-M380-O1 Rev A ProDoc BFA Series 23