The ProDoc BFA Series Scale has been designed with an Event Counter type of security seal.
When selected, the ProDoc display will show a 3-digit number representing the Calibration
counter and then a 3-digit number representing the Setup counters.
To Review the Event Counter
1. If scale is on, press ON/OFF key.
2. Display will show oFF and turn scale off.
3. Press and hold the LOCK/RELEASE key and then press the ON/OFF key.
4. The display will turn on all digits, show the software version for a few seconds and then
change to show CALCH.
5. Release all keys.
6. The display will show CALCH for two seconds and then change to show the 3-digit
calibration counter.
7. Next, the display will show SetCH for two seconds and then change to show the 3-digit
setup counter.
8. To return to normal operation, press the PRINT/UNITS key.
9. Otherwise, press ON/OFF key to turn off scale.
EVENT COUNTERS
0044-M380-O1 Rev A ProDoc BFA Series
43