Setup - Cardinal PD150 Owner's Manual

Your ProDoc BFA Series Scale has been pre-configured at the factory and should not require
changes for use in most applications. However, if the factory settings do not meet the
requirements of your operation, the following describes the setup process for your scale.
To Enter Setup
1. With the scale off, press and hold the ZERO key and then press the ON/OFF key.
2. The display will turn on all digits, show the software version for a few seconds and then
change to show SETUP.
3. Release all keys.
4. The display will change to show nin.
5. The scale is now ready for setup.
IMPORTANT! When a prompt and value displayed are acceptable, press the
MODE/ENTER/HEIGHT key to save the setting and proceed to the next
prompt. To change a setting, use the numeric keys to enter a new value and
then press the MODE/ENTER/HEIGHT key to save the new setting and
advance to the next prompt.
nin (MINUTES)
With display showing nin, press MODE/ENTER/HEIGHT key to show current setting. If
value displayed is acceptable, press MODE/ENTER/HEIGHT key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to enter a new value from 00 to 59 and
then press the MODE/ENTER/HEIGHT key to save it and proceed to the next prompt.
hh (HOURS)
With display showing hh, press MODE/ENTER/HEIGHT key to show current setting. If value
displayed is acceptable, press MODE/ENTER/HEIGHT key to save it and proceed to the next
prompt. Otherwise, use the numeric keys to enter a new value from 00 to 23 and then press
the MODE/ENTER/HEIGHT key to save it and proceed to the next prompt.
IMPORTANT! Time is entered in a 24-hour format. When entering times after noon (12:00
PM), you must add 12 to time. For example, 3:00 PM would be entered as 15.
yy (YEARS)
With display showing YY, press MODE/ENTER/HEIGHT key to show current setting. If
value displayed is acceptable, press MODE/ENTER/HEIGHT key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to enter a new value from 00 to 99 and
then press the MODE/ENTER/HEIGHT key to save it and proceed to the next prompt. Note
that 00 represents year 2000, 01 represents 2001 and so on.
nn (MONTHS)
With display showing nn, press MODE/ENTER/HEIGHT key to show current setting. If
value displayed is acceptable, press MODE/ENTER/HEIGHT key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to enter a new value from 00 to 12 and
then press the MODE/ENTER/HEIGHT key to save it and proceed to the next prompt. Note
that 01 represents January, 02 represents February so on.
dd (DAY)
With display showing dd, press MODE/ENTER/HEIGHT key to show current setting. If
value displayed is acceptable, press MODE/ENTER/HEIGHT key to save it and proceed to
the next prompt. Otherwise, use the numeric keys to enter a new value from 00 to 31 and
then press the MODE/ENTER/HEIGHT key to save it and proceed to the next prompt.
38

SETUP

0044-M380-O1 Rev A ProDoc BFA Series