Weighing Only - Cardinal PD150 Owner's Manual

The accuracy of the results depends on how you stand on the scale. Position your feet for
maximum contact on the metal electrodes on the platform. This ensures the best contact
between your feet and the metal contacts. Stay on the scale until the body fat estimation is
completed and the result is displayed.

Weighing Only

1. Press ON/OFF key.
2. The display will turn on, show all digits and then the software version will be displayed for
a few seconds.
3. Next, a small o is shown and moves across the display until a stable zero is established.
4. After establishing zero, the scale will show 0.0 on display.
5. Press and hold PRINT/UNITS key to toggle between kilograms and pounds. The kg or lb
annunciator will turn on to show which weighing unit is active.
6. Patient may now step on scale and stand still while the weight is being measured. The STA
annunciator will be turned on when the weight is stable.
7. Read and record weight displayed.
8. Patient may now step off scale.
9. To turn scale off, press ON/OFF key. Display will show oFF and turn off.
If the Automatic Shutdown feature has been enable, the scale will turn off after a
pre-defined time of inactivity (no motion or weight on scale). You must press the
ON/OFF key to turn the scale back ON.
If the Sleep Mode feature is active and the scale display is showing 0.0 kg/lb (remains at
the center of zero) for a pre-defined time, the display will show SLEEP. The scale will
exit the Sleep Mode when any key is pressed or a patient steps on the scale.
OPERATION
0044-M380-O1 Rev A ProDoc BFA Series 27