Bmi Measure With Mechanical Height Rod Or No Height Rod - Cardinal PD150 Owner's Manual

BMI Measure
with Mechanical Height Rod or No Height Rod
1. Press ON/OFF key.
2. The display will turn on, show all digits, the software version for a few seconds and then a
small o is shown and moves across the display until a stable zero is established.
3. Next, after establishing zero, the scale will show 0.0 on display.
4. Press and hold PRINT/UNITS key to toggle between kilograms and pounds. The kg or lb
annunciator will turn on to show which weighing unit is active.
NOTE: Changing the units between kilograms and pounds will also change the height
measurement between centimeters (cm) and feet/inches ( ' / " ).
5. Patient may now step on scale.
6. Press MODE/ENTER/HEIGHT key.
7. Enter the patient's height by using the numeric keys.
A. If Pounds Only or Pounds/Kilograms was selected for Unit= in setup, display will change
to show 5' 6.1".with the digit for the feet flashing.
a. Use numeric keys to enter 1 digit for height in feet, then press
MODE/ENTER/HEIGHT key.
b. Display will change to the digit flashing for the decimal inches.
c. Use numeric keys to enter up to 2 digits (9.9 max.) for height in inches and then
press MODE/ENTER/HEIGHT key.
d. The display will change to the BFA mode (BFA annunciator will be flashing).
e. Press the RECALL or
will be flashing).
B. If Kilograms Only, Kilograms/Pounds or Stones and Pounds or Kilograms was selected
for Unit= in setup, display will change to show 168.0
a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and then
press MODE/ENTER/HEIGHT key.
b. The display will change to the BFA mode (BFA annunciator will be flashing).
c. Press the RECALL or
will be flashing).
8. Press MODE/ENTER/HEIGHT key.
9. While the patient is still standing on the scale, the result will be shown in sequence: BMI,
Weight and Height.
10. Each result will be displayed around 4 seconds, sequentially 3 times. Note that you can
press the RECALL or
While the scale is displaying the result, record patient's BMI, Weight and Height.
11. The scale will then automatically return to the weighing mode.
12. Patient may now step off scale.
13. To turn scale off, press ON/OFF key. Display will show oFF and turn off.
If the Automatic Shutdown feature has been enable, the scale will turn off after a
pre-defined time of inactivity (no motion on scale).
If the Sleep Mode feature is active and the scale display is showing 0.0 kg/lb (remains at
the center of zero) for a pre-defined time, the display will show SLEEP.
OPERATION
STORE keys to select the BMI mode (BMI annunciator
STORE keys to select the BMI mode (BMI annunciator
STORE keys to rapidly go forward or backward to view the results.
0044-M380-O1 Rev A ProDoc BFA Series
.
cm
31