Page 1
DIGITAL PORTION SCALE PS-5 OWNER’S Manual CARDINAL SCALE MFG. CO. PO BOX 151 • WEBB CITY, MO 64870 8528-M013-O1 Rev G Printed in USA PH (417) 673-4631 • FAX (417) 673-5001 09/00 Web Site - http://www.detectoscale.com...
INSTALLATION 1. Remove the scale from its shipping container and inspect it for shipping damage. Should evidence of damage be found, the carrier should be contacted at once. Retain the shipping container for future storage or shipment of the scale. 2.
The display will show SCA SCA. Press the WT/UNIT key to display the current setting. For a PS-5 the display should show P P - - 5 5 . Press the WT/UNIT key until P P - - 5 5 is displayed. Press the ON/TARE key to save the setting.
SETUP AND CALIBRATION, CONT. UNLOAD WEIGHT With the display showing uLd uLd, remove the 2 lb test weight from the scale tray. Allow approximately five seconds for the scale to stabilize, then press the ON/TARE key to continue the calibration. Dashes will be displayed from the left to the right of the display momentarily, then the display will change to unt unt.
Need help?
Do you have a question about the Detecto PS-5 and is the answer not in the manual?
Questions and answers