Tare Weight Entry; Push Button Tare; Pre-Set Tare With Known Weight Of Container; Pre-Set Tare With Container On Scale - Cardinal C6 Operation Manual

Tare Weight Entry

Push Button Tare

1. With the scale in the Weight mode, place the empty container on the scale platform.
2. Press the TARE key. The WEIGHT display will change to zero and the NET
annunciator illuminates, indicating net weight is being displayed. The empty container's
weight has been entered as "tare weight".

Pre-set Tare with Known Weight of Container

1. With the scale in the Weight mode, press the TARE key. The display will change to
show PrEtA and the PIECES display will show ------ (six dashes).
2. Using the numeric keypad, enter the desired tare (container) weight.
3. After the desired tare value has been entered, press the TARE key. The display will
show the Net weight (Gross minus tare) and the NET annunciator will illuminate.
4. Proceed with the counting or weighing operation.

Pre-set Tare with Container on Scale

1. With the scale in the Weight mode, place the container on the scale.
2. Read the weight of the container.
3. Using the numeric keypad, enter the container weight and press the TARE key.
4. The display will show the Net weight (Gross minus tare) and the NET annunciator will
illuminate.
5. Proceed with the counting or weighing operation.

To Clear the Tare

To return to a zero tare, simply remove all material from the scale platform and press the
TARE key. This will reset the tare weight to zero.
OPERATION, CONT.
8526-M260-O1  C Series Operation
7