Totalizing - Sartorius FC Operating Instructions Manual

Totalizing

L
Purpose
This application program runs as
a cumulative memory function.
You can use this application in
combination with any program chosen
from Application 1 (such as counting,
weighing in percent) and one from
Application 2 (checkweighing,
time-controlled functions).
Features
– Totalization of weight values and
calculated values
– Optional configuration in the Setup
menu for simultaneous storage of net
and calculated values
– Optional configuration in the Setup
menu for loading weight values
and calculated values either from
Application 1 (e.g., counting, weighing
in percent) or from Application 2
(checkweighing, time-controlled
functions)
– Totalization memory for up to
65,535 values
– Simultaneous display in the text line
of transaction counter and, e.g., the
current total
– Optional configuration in the Setup
menu for having the scale tare auto-
matically after a value is stored in the
totalization memory, if no preset tare
has been entered
– Manual input of the number of
individual weighing operations and
nDef
confirmation using the
(target no. of operation nDef). Result
printed and memory cleared after
printout of nDef.
– Optional configuration in the Setup
menu to add the current weight,
with display accuracy, to the current
M+
total by pressing the soft key
and generate a printout of the result
72
– Optional configuration in the Setup
menu for stability-dependent storage
of the measured value:
scale functions,
Stability range
– Optional automatic storage of
measured values
Storage of measured value is indicated
by ; indicates that you can
Uu zz
place a load on the scale.
– Minimum load threshold for automatic
storage
M-
– Press the
value added to the totalizing memory.
The transaction counter value is
reduced by one and a printout is
generated.
MR
– Press the
about number of transactions and the
current total. In the Setup menu, you
can define whether the information is
displayed and printed, or only printed,
and whether the information comprises
an intermediate or final evaluation
– In the Info window you can choose
which value is displayed in the text line
during weighing
– Printout of the end result independent
of which program is configured for
Application 1 or Application 2.
Configure the Setup menu to define
which values are included on the
printout (printout of individual
components)
– Press the key identified by
soft key label) for a printout of an intermediate
evaluation after each addition or a final
evaluation
– If you end the totalization process by
pressing c without having first
MR
pressed the
a final evaluation is printed when you
press c
– Optional configuration in the Setup
menu to clear the totalizing memory
and reset the transaction counter by
pressing c or after an evaluation is
printed out
– Totalization data and transaction
counter data are stored in non-volatile
memory
– Continue totalization after turning the
scale off and back on
Balance/
soft key to delete the last
soft key for information
MR
(soft key
soft key for a printout,
Factory Settings of Parameters
Off
Automatic storage:
Minimum load for automatic storage:
10 digits
Source of data for auto storage:
Application 1
Net
Evaluated values:
Evaluation mode, MR key function:
Intermediate
evaluation, print
Off
M+/M– function, then tare:
Printout of individual components:
2 digits
Stability range:
Application-defined output:
Off
Print then tare:
Soft Key Functions
M+
Add weight values or
application values to the total
in the totalization memory.
The component or transaction
counter value increases by one
each time you press this key.
M-
Delete the last value added
to memory. The transaction
counter value decreases by 1.
You cannot delete previous
values by repeatedly pressing
this key.
MR
Print or display an inter-
mediate or final evaluation
nDef
Store the input number
of components
Printout for Totalizing
The transaction or component counter is
printed in front of each measured value
(weight). When an intermediate or final
evaluation is printed out, all results up to
this point are included.
n 5
Total +151.67 g
Yes