Sartorius FC Operating Instructions Manual page 55

Preparation
Turn on the scale: press e
> Sartorius logo is displayed
Select the "Animal weighing" application in the Setup menu: press H
Application parameters
Select
then the soft key once
O
Application 1 (basic settings)
Select
Animal weigh.
Select
Animal weigh.
Confirm
Animal weighing Animal activity
(Averaging)
Start
Minimum load for
automatic storage
Decimal places in
calculated result
Printout
o = factory setting
see also the "Application Menu (Overview)" in the chapter entitled "Configuration"
Save settings and exit the Setup menu: press the
: press the soft key 2+,
q
: or soft key repeatedly
Q q
: soft key
O
Calm
Normal
Active
0.1% of animal/object
0.2% of animal/object
0.5% of animal/object
1% of animal/object
2% of animal/object
o 5% of animal/object
10% of animal/object
20% of animal/object
50% of animal/object
100% of animal/object
Manual mode
o Automatic mode
None
10 display increments
20 display increments
50 display increments
o 100 display increments
200 display increments
500 display increments
1,000 display increments
None
1 decimal place
o 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
None
o Average weight only
Average and calculated
soft key
oo
: press the soft key
O
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
isoTST
Press the soft key
> See "Calibration/Adjustment" for
further instructions
Toggling to the Next Application
Press D
> See the section on the corresponding
application program for further
instructions
Setup (setting parameters)
Press H
> See "Configuration" for further
instructions
Turning Off the Scale
Press e
> The scale shuts off
55