Sartorius FC Operating Instructions Manual page 50

Counting
A
Practical Example
Determining an Unknown Piece Count; Weighing in the Preset Reference Sample Quantity
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Counting: Average piece weight updating: Manual
Setup: Printout: Application-defined output: Autoprint upon initialization: All values
Step
1. Delete previous setting if necessary
2. Prepare a container for the
parts to be counted
3. Tare the scale
4. Place the reference sample quantity
on the scale (example: 10 pcs)
5. Determine the average piece
weight (number of decimal
places displayed depends on
the scale model)
6. If necessary, increase the number
of parts and perform reference
sample updating (example:
7 additional pieces)
7. Weigh uncounted parts
8. If desired, print total piece count
(here: 153 pcs)
50
Key (or instruction)
c
Place the empty container
on the scale
t
Place the displayed number
of parts in the container
Start
soft key
Place additional parts
in the container
Update
soft key
Place parts to be counted
in the container
p
Display/Output
nRef +
wRef + 2.14800 g
nRef +
wRef + 2.14800 g
Qnt +
10 pcs
17 pcs
153 pcs