D-Link xStack DGS-3120 Series Cli Reference Manual page 1130

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
configuration
Port Security port security is exceeded
to its maximum learning
size and will not learn any
new address
VID assigned from
RADIUS
RADIUS server after
RADIUS client is
authenticated by RADIUS
server successfully .This
VID will be assigned to the
port and this port will be
the VLAN untagged port
member.
Ingress bandwidth
assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully .This Ingress
bandwidth will be
assigned to the port.
Egress bandwidth
assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully .This egress
bandwidth will be
assigned to the port.
802.1p default priority
assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully. This 802.1p
default priority will be
assigned to the port.
Failed to assign ACL
profiles/rules from
RADIUS server.
802.1X 802.1X Authentication
failure.
802.1X Authentication
successful.
MAC-based A host fails to pass the
Access Control authentication
The authorized user
number on a port reaches
the max user limit.
The authorized user
number on a port is below
the max user limit in a
time interval.
The authorized user
number on whole device
reaches the max user
limit.
The authorized user
number on whole device
is below the max user limit
configuration (Username:
<username> )
Port security violation (MAC
address: <macaddr> on port:
<[unitID:]portNum>)
RADIUS server <ipaddr>
assigned VID :<vlanID> to port
<[unitID:]portNum>
(account :<username> )
RADIUS server <ipaddr>
assigned ingress
bandwith :<ingressBandwidth>
to port <[unitID:]portNum>
(account : <username>)
RADIUS server <ipaddr>
assigned egress
bandwith :<egressBandwidth> to
port <[unitID:]portNum>
(account: <username>)
RADIUS server <ipaddr>
assigned 802.1p default
priority:<priority> to port
<[unitID:]portNum> (account :
<username>)
RADIUS server <ipaddr>
assigns <username> ACL failure
at port <[unitID]portNum>
(<string>)
802.1X Authentication failure [for
<reason> ] from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr> )
802.1X Authentication
successful from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr>)
MAC-based Access Control
unauthenticated host(MAC:
<macaddr>, Port
<[unitID:]portNum>, VID: <vid>)
Port <[unitID:]portNum> enters
MAC-based Access Control stop
learning state.
Port <[unitID:]portNum> recovers
from MAC-based Access Control
stop learning state.
MAC-based Access Control
enters stop learning state.
MAC-based Access Control
recovers from stop learning
state.
1125
Warning
Informational
Informational
Informational
Informational
Warning
Warning
Informational
Critical
Warning per port
Warning per port
Warning per system
Warning per system