Table of Contents
Advertisement
The Control Panel
The operation of the projector can be monitored by viewing the information displayed on the keypad with its associated
LED display strip as shown in Figure 2.1.
The keypad LED display strip normally indicates the frame counter for the current show. However, this display strip may
also display other command-specific information, as explained in the descriptions of the individual commands in Section
0. LEDs on the keys associated with projector commands toggle on to indicate projector action. For example, if the
projector is stopped, the light on the <STOP> key is on.
CHRISTIE INC. - 35/70 Service/PM Manual
July, 1997
Figure 2.1: Control Panel
2 . G e n e r a l D e s c r i p t i o n
Advertisement
Table of Contents
