Graphics Accelerator Driver
The following is the procedure when it is necessary to install manually.
Please install the graphics accelerator driver according to the following < Installation of the graphics
accelerator driver > procedures.
Installation of Graphics Accelerator Driver
1.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
2.
Run "SETUP.EXE" which is in the following directory.
<DVD-ROM Drive Letter>:\WINNT\W2K\VIDEO\SETUP.EXE.
3.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
4.
Restart the system.
End of installation.
USB 2.0 Driver
USB 2.0 Driver is pre-installed. When restoring the system or re-installing the system, the driver is
automatically installed in the process of updating the system.
Installing Windows 2000 F-15