Configuring Your Server - NEC Express5800 User Manual

4-10 Configuring Your Server

The items which can be set on the Main menu screen and their functions are described below.
Option
System Time
System Date
Legacy Diskette A
Hard Disk Pre-Delay
Primary IDE Master/
Primary IDE Slave
Secondary IDE/Master
Secondary IDE/Slave
SATA Port 1
SATA Port 2
Serial ATA Channel 0 Master
Serial ATA Channel 1 Master
Advanced Processor Options Select submenu
Language
Parameter Description
HH:MM:SS Set the system time.
MM/DD/YYYY Set the system date.
[Disabled] Set the settings of floppy disk
drive A.
1
360Kb 5 /
4
If you replace the floppy disk
1.2MB 5 1 /
4
drive with internal backup
1
720Kb 3 /
2
device and use the external
1
1.44/1.25MB 3 /
2
USB floppy disk drive for
1
2.88MB 3 /
2
reinstallation of OS or
maintenance work, set this
item to "Disabled".
Allows slower spin-up drives to
[Disabled]
come ready.
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
Select submenu Displays the information on the
device connected to each
channel. When only one hard
disk drive is connected to
SATA connector, the device
information is displayed in the
area for Primary IDE.
The settings of some items
may be changed. However,
leave the items as they are at
the shipment.
Select submenu Displayed only when two or
more serial ATA hard disk
drives are connected. The
information on the device is
indicated in the area for SATA
Port 1/2 and Serial ATA
Channel 0 Master. The settings
of some items may be
changed. However, leave the
items as they are at the
shipment.
Shows the processor settings
submenu.
[English (US)] Select which language BIOS
displays.
Français
Deutsch
Español
Italiano
Your Setting
[ ]: Factory-set